2.50mm Pitch Nano-Fit Right-Angle Header, Through Hole, Dual Row, to molex 1053141108,Nano-Fit Right-Angle Header,For Te 4-2337939-7 PCI & PCI Express Connectors, SMT, 98POS,15u", MYLAR, ST,pci express gen 4,pci express gen 4 | lanboon.com,pci express gen 4,PCIe Gen 4 is the latest version of the popular PCI Express standard, offering unparalleled data transfer speeds of up to 16GT/s.,Alternative to Molex Sl Modular Connector Molex 70066 2.54mm Pitch Sl Header,Molex 70066 Connector,3.96mm 2 circuits wire to board connector equivalent to molex 09652028,wire connector pcb,wire connector pcb | lanboon.com,wire connector pcb,Wire connector PCB, also known as terminal block, is an electrical connector used to connect wires to printed circuit boards. It is designed to provide reliable and secure electrical contact between the wire and the board.

What is the manufacturing process of the spring needle (pogo pin)?

2023-09-13

1. Spring needle (pogo pin)processing: the most advanced and confidential machine tool is used to process the spring needle, and the machined parts must be in accordance with the quality standard quasi.

2. Spring needle(pogo pin) plating: this is also a very important part, to ensure that the gold-plated layer in the hole is good, free of blackening, different colors, and Poor plating.

3. Spring needle (pogo pin)electroplating: This is also a very important part. It is important to ensure that the gold-plated layer in the hole is good, no blackening, and the like.

4. Quality inspection of spring needle(pogo pin): after the processing is finished, the quality part will check each pogo pin spring needle to see if they have any difference in appearance. And whether the spring is elastic or the like.5. Batch check and delivery: a batch of products can be selected to be tested before shipment.

//www.dghoyato.com